| Quantity: | |
|---|---|
The rotary lobe pump is a positive displacement pump. It is suitable for transferring all kinds of fluid, either in low viscosity or in high viscosity, even the liquids with particles. Because of the low working speed, the lobe pump can pump the media in gentle with making less damage to the product. The lobe pump gives almost the same flow rate at the set speed which gives a relatively constant output of the product. It has horizontal TUL and vertical TUR type to reach the target of different fluid direction control.
JONENG
8481804090
SS304 High Suction Head Jacketed 11kw Positive Gear Lobe Pump for Toothpaste
The rotary lobe pump is a positive displacement pump. It is suitable for transferring all kinds of fluid, either in low viscosity or in high viscosity, even the liquids with particles. Because of the low working speed, the lobe pump can pump the media in gentle with making less damage to the product. The lobe pump gives almost the same flow rate at the set speed which gives a relatively constant output of the product. It has horizontal TUL and vertical TUR type to reach the target of different fluid direction control.
Working Principles
The lobe pump is consist of a casting housing, shaft, rotors and mechanical seal. Shaft connects the motor and rotors. When motor starts working, the shaft will rotate which makes the rotor to revolve synchronously. Two rotors inside the casing without touching each other but dividing the cavity into several parts gives space for the fluid to fill in. As rotor moves in counter-clockwise directions, it carries the fluid from inlet to discharge port while generating pressure at the discharge port.
Stainless Steel Lobe Pump Specification Chart
Max. flow rate | 50m3/h |
Max viscosity | 100000Cps |
Power supply | 0.75kw to 22kw |
Max. temperature | 120 °C |
Material | SS304/SS316L |
| Mechanical seal | single mechanical seal/double mechanical seal |
| Inlet/outlet connection | Thread, Clamp, Flange,Weld |
| Internal Surface treatment | ≤ Ra0.8μm as default |
| Motor brand | ABB or local motor |
| Motor type | variable frequency motor, fixed speed motor |
Features
● Heat jacket as an optional choice for the media that is easy to solidification and freezing, such as chocolate
● Super clean and compact design in mechanical seal to keep hygiene
● There is no friction between rotors and pump body which ensures a long using life
● It is time-saving in fast assemble and disassemble.
● It has a characteristics of low speed with high output
● The conveying process is smooth and continuous
● Built-in safety valve can be require if any need.
● It can be equipped with trolley and control panel
Application
The rotary lobe pump is sanitary design which has wide use in application. It is not only used in high viscosity fluids, such as tomato paste, honey, chocolate, yogurt, but also can be used for the CIP&SIP system. It is widely applied in food, beverage, dairy, cosmetics,pharmaceuticals,chemical industry and others.
Working Principles
The lobe pump is consist of a casting housing, shaft, rotors and mechanical seal. Shaft connects the motor and rotors. When motor starts working, the shaft will rotate which makes the rotor to revolve synchronously. Two rotors inside the casing without touching each other but dividing the cavity into several parts gives space for the fluid to fill in. As rotor moves in counter-clockwise directions, it carries the fluid from inlet to discharge port while generating pressure at the discharge port.
Feature and Specification
Stainless Steel Self-Priming Pump Specification Chart
Max. flow rate | 50m3/h |
Max viscosity | 100000Cps |
Power supply | 0.75kw to 22kw |
Max. temperature | 120 °C |
Material | SS304/SS316L |
| Mechanical seal | single mechanical seal/double mechanical seal |
| Inlet/outlet connection | Thread, Clamp, Flange,Weld |
| Internal Surface treatment | ≤ Ra0.8μm as default |
| Motor brand | ABB or local motor |
| Motor type | variable frequency motor, fixed speed motor |
Max. flow rate | 50m3/h |
Frequency | 50HZ/60HZ |
Max. pressure | 8 bar |
Max. temperature | 110°C |
Material | SS304/SS316L |
| Inlet/outlet connection | Clamp, Weld, Flange |
| Inlet/outlet size | 1”-3” |
| Diaphragm | PTFE, PTFE with white back, EPDM, white EPDM, white NBR |
| Driving way | Air or Motor |
Features
● Heat jacket as an optional choice for the media that is easy to solidification and freezing, such as chocolate
● Super clean and compact design in mechanical seal to keep hygiene
● There is no friction between rotors and pump body which ensures a long using life
● It is time-saving in fast assemble and disassemble.
● It has a characteristics of low speed with high output
● The conveying process is smooth and continuous
● Built-in safety valve can be require if any need.
● It can be equipped with trolley and control panel
Application
The rotary lobe pump is sanitary design which has wide use in application. It is not only used in high viscosity fluids, such as tomato paste, honey, chocolate, yogurt, but also can be used for the CIP&SIP system. It is widely applied in food, beverage, dairy, cosmetics,pharmaceuticals,chemical industry and others.
SS304 High Suction Head Jacketed 11kw Positive Gear Lobe Pump for Toothpaste
The rotary lobe pump is a positive displacement pump. It is suitable for transferring all kinds of fluid, either in low viscosity or in high viscosity, even the liquids with particles. Because of the low working speed, the lobe pump can pump the media in gentle with making less damage to the product. The lobe pump gives almost the same flow rate at the set speed which gives a relatively constant output of the product. It has horizontal TUL and vertical TUR type to reach the target of different fluid direction control.
Working Principles
The lobe pump is consist of a casting housing, shaft, rotors and mechanical seal. Shaft connects the motor and rotors. When motor starts working, the shaft will rotate which makes the rotor to revolve synchronously. Two rotors inside the casing without touching each other but dividing the cavity into several parts gives space for the fluid to fill in. As rotor moves in counter-clockwise directions, it carries the fluid from inlet to discharge port while generating pressure at the discharge port.
Stainless Steel Lobe Pump Specification Chart
Max. flow rate | 50m3/h |
Max viscosity | 100000Cps |
Power supply | 0.75kw to 22kw |
Max. temperature | 120 °C |
Material | SS304/SS316L |
| Mechanical seal | single mechanical seal/double mechanical seal |
| Inlet/outlet connection | Thread, Clamp, Flange,Weld |
| Internal Surface treatment | ≤ Ra0.8μm as default |
| Motor brand | ABB or local motor |
| Motor type | variable frequency motor, fixed speed motor |
Features
● Heat jacket as an optional choice for the media that is easy to solidification and freezing, such as chocolate
● Super clean and compact design in mechanical seal to keep hygiene
● There is no friction between rotors and pump body which ensures a long using life
● It is time-saving in fast assemble and disassemble.
● It has a characteristics of low speed with high output
● The conveying process is smooth and continuous
● Built-in safety valve can be require if any need.
● It can be equipped with trolley and control panel
Application
The rotary lobe pump is sanitary design which has wide use in application. It is not only used in high viscosity fluids, such as tomato paste, honey, chocolate, yogurt, but also can be used for the CIP&SIP system. It is widely applied in food, beverage, dairy, cosmetics,pharmaceuticals,chemical industry and others.
Working Principles
The lobe pump is consist of a casting housing, shaft, rotors and mechanical seal. Shaft connects the motor and rotors. When motor starts working, the shaft will rotate which makes the rotor to revolve synchronously. Two rotors inside the casing without touching each other but dividing the cavity into several parts gives space for the fluid to fill in. As rotor moves in counter-clockwise directions, it carries the fluid from inlet to discharge port while generating pressure at the discharge port.
Feature and Specification
Stainless Steel Self-Priming Pump Specification Chart
Max. flow rate | 50m3/h |
Max viscosity | 100000Cps |
Power supply | 0.75kw to 22kw |
Max. temperature | 120 °C |
Material | SS304/SS316L |
| Mechanical seal | single mechanical seal/double mechanical seal |
| Inlet/outlet connection | Thread, Clamp, Flange,Weld |
| Internal Surface treatment | ≤ Ra0.8μm as default |
| Motor brand | ABB or local motor |
| Motor type | variable frequency motor, fixed speed motor |
Max. flow rate | 50m3/h |
Frequency | 50HZ/60HZ |
Max. pressure | 8 bar |
Max. temperature | 110°C |
Material | SS304/SS316L |
| Inlet/outlet connection | Clamp, Weld, Flange |
| Inlet/outlet size | 1”-3” |
| Diaphragm | PTFE, PTFE with white back, EPDM, white EPDM, white NBR |
| Driving way | Air or Motor |
Features
● Heat jacket as an optional choice for the media that is easy to solidification and freezing, such as chocolate
● Super clean and compact design in mechanical seal to keep hygiene
● There is no friction between rotors and pump body which ensures a long using life
● It is time-saving in fast assemble and disassemble.
● It has a characteristics of low speed with high output
● The conveying process is smooth and continuous
● Built-in safety valve can be require if any need.
● It can be equipped with trolley and control panel
Application
The rotary lobe pump is sanitary design which has wide use in application. It is not only used in high viscosity fluids, such as tomato paste, honey, chocolate, yogurt, but also can be used for the CIP&SIP system. It is widely applied in food, beverage, dairy, cosmetics,pharmaceuticals,chemical industry and others.
