| Quantity: | |
|---|---|
A screw pump is a type of positive displacement pump that uses one or more screws to move fluid through the pump. It is also known as an Archimedean screw pump or a progressive cavity pump. The primary components of a screw pump include a helical screw rotor (or screws) and a stator.
Screw pumps are positive displacement pumps that transfer liquid or water along the screw shaft by use of one or more screws. To pressurize the fluid and transfer it into the system, these screws interlock. Within the cylinder's hollow, these screws reciprocate and interact with one another.
JONENG
8481804090
Stainless Steel Sanitary High Temperature Vertical Transfer Double Screw Pump with Funnel
A screw pump is a type of positive displacement pump that uses one or more screws to move fluid through the pump. It is also known as an Archimedean screw pump or a progressive cavity pump. The primary components of a screw pump include a helical screw rotor (or screws) and a stator.
Screw pumps are positive displacement pumps that transfer liquid or water along the screw shaft by use of one or more screws. To pressurize the fluid and transfer it into the system, these screws interlock. Within the cylinder's hollow, these screws reciprocate and interact with one another.
Working Principles
The working principle of a screw pump revolves around the positive displacement mechanism, where fluid is moved by trapping and displacing a fixed volume of it through the pump. Screw pumps are designed to use one or more helical screws to achieve this displacement. The main components involved in the working of a screw pump are the screws (rotors) and the stator.
Here are the basic steps of working of screw pumps:-
Screw pumps have one or more helical screws (rotors) that are typically mounted on a central shaft.
The screws rotate inside a stationary component called the stator. The stator is typically a cylindrical or semi-cylindrical casing that surrounds the screws.
Fluid to be pumped enters the pump at the suction end. As the screws rotate, they create expanding cavities that draw in the fluid.
The helical shape of the screws and the stator causes the expanding cavities to trap a fixed volume of fluid. This trapped fluid is carried along the length of the screw as it rotates.
As the screws continue to rotate, the trapped fluid is moved axially along the screws. The fluid is forced towards the discharge end of the pump.
The fluid is then expelled from the pump at the discharge end. The rotation of the screws ensures a continuous and non-pulsating flow.
The process is repeated as the screws continue to rotate, creating a consistent flow of fluid.
Stainless Steel Lobe Pump Specification Chart
Investment casting pump body | AISI 304/316L |
Gaskets | EPDM |
Mechanical sealing | C/SiC/EPDM |
Internal surface finish | Ra<=0.6mm |
External surface finish | mirror polished |
Max. speed | 720RPM |
Max. pressure | up to 12 bar |
Max. flow | 60m3/h |
Max. temp | up to 350oC |
Features
● Easy to maintain
● Steady and non-pulsating flow
● High viscosity handling
● Versatile, self-priming
● Low noise and vibration
● Helps not to pump contaminants in to fluid
● High pumping speed
● Cost efficient
Application
Screw pumps are mostly used on fluids of a higher viscosity, moving these fluids with screw pumps results in energy efficient and a relatively compact machine when compared to other pump types i.e centrifugal pump.
Working Principles
The lobe pump is consist of a casting housing, shaft, rotors and mechanical seal. Shaft connects the motor and rotors. When motor starts working, the shaft will rotate which makes the rotor to revolve synchronously. Two rotors inside the casing without touching each other but dividing the cavity into several parts gives space for the fluid to fill in. As rotor moves in counter-clockwise directions, it carries the fluid from inlet to discharge port while generating pressure at the discharge port.
Feature and Specification
Stainless Steel Self-Priming Pump Specification Chart
Max. flow rate | 50m3/h |
Max viscosity | 100000Cps |
Power supply | 0.75kw to 22kw |
Max. temperature | 120 °C |
Material | SS304/SS316L |
| Mechanical seal | single mechanical seal/double mechanical seal |
| Inlet/outlet connection | Thread, Clamp, Flange,Weld |
| Internal Surface treatment | ≤ Ra0.8μm as default |
| Motor brand | ABB or local motor |
| Motor type | variable frequency motor, fixed speed motor |
Max. flow rate | 50m3/h |
Frequency | 50HZ/60HZ |
Max. pressure | 8 bar |
Max. temperature | 110°C |
Material | SS304/SS316L |
| Inlet/outlet connection | Clamp, Weld, Flange |
| Inlet/outlet size | 1”-3” |
| Diaphragm | PTFE, PTFE with white back, EPDM, white EPDM, white NBR |
| Driving way | Air or Motor |
Features
● Heat jacket as an optional choice for the media that is easy to solidification and freezing, such as chocolate
● Super clean and compact design in mechanical seal to keep hygiene
● There is no friction between rotors and pump body which ensures a long using life
● It is time-saving in fast assemble and disassemble.
● It has a characteristics of low speed with high output
● The conveying process is smooth and continuous
● Built-in safety valve can be require if any need.
● It can be equipped with trolley and control panel
Application
The rotary lobe pump is sanitary design which has wide use in application. It is not only used in high viscosity fluids, such as tomato paste, honey, chocolate, yogurt, but also can be used for the CIP&SIP system. It is widely applied in food, beverage, dairy, cosmetics,pharmaceuticals,chemical industry and others.
Stainless Steel Sanitary High Temperature Vertical Transfer Double Screw Pump with Funnel
A screw pump is a type of positive displacement pump that uses one or more screws to move fluid through the pump. It is also known as an Archimedean screw pump or a progressive cavity pump. The primary components of a screw pump include a helical screw rotor (or screws) and a stator.
Screw pumps are positive displacement pumps that transfer liquid or water along the screw shaft by use of one or more screws. To pressurize the fluid and transfer it into the system, these screws interlock. Within the cylinder's hollow, these screws reciprocate and interact with one another.
Working Principles
The working principle of a screw pump revolves around the positive displacement mechanism, where fluid is moved by trapping and displacing a fixed volume of it through the pump. Screw pumps are designed to use one or more helical screws to achieve this displacement. The main components involved in the working of a screw pump are the screws (rotors) and the stator.
Here are the basic steps of working of screw pumps:-
Screw pumps have one or more helical screws (rotors) that are typically mounted on a central shaft.
The screws rotate inside a stationary component called the stator. The stator is typically a cylindrical or semi-cylindrical casing that surrounds the screws.
Fluid to be pumped enters the pump at the suction end. As the screws rotate, they create expanding cavities that draw in the fluid.
The helical shape of the screws and the stator causes the expanding cavities to trap a fixed volume of fluid. This trapped fluid is carried along the length of the screw as it rotates.
As the screws continue to rotate, the trapped fluid is moved axially along the screws. The fluid is forced towards the discharge end of the pump.
The fluid is then expelled from the pump at the discharge end. The rotation of the screws ensures a continuous and non-pulsating flow.
The process is repeated as the screws continue to rotate, creating a consistent flow of fluid.
Stainless Steel Lobe Pump Specification Chart
Investment casting pump body | AISI 304/316L |
Gaskets | EPDM |
Mechanical sealing | C/SiC/EPDM |
Internal surface finish | Ra<=0.6mm |
External surface finish | mirror polished |
Max. speed | 720RPM |
Max. pressure | up to 12 bar |
Max. flow | 60m3/h |
Max. temp | up to 350oC |
Features
● Easy to maintain
● Steady and non-pulsating flow
● High viscosity handling
● Versatile, self-priming
● Low noise and vibration
● Helps not to pump contaminants in to fluid
● High pumping speed
● Cost efficient
Application
Screw pumps are mostly used on fluids of a higher viscosity, moving these fluids with screw pumps results in energy efficient and a relatively compact machine when compared to other pump types i.e centrifugal pump.
Working Principles
The lobe pump is consist of a casting housing, shaft, rotors and mechanical seal. Shaft connects the motor and rotors. When motor starts working, the shaft will rotate which makes the rotor to revolve synchronously. Two rotors inside the casing without touching each other but dividing the cavity into several parts gives space for the fluid to fill in. As rotor moves in counter-clockwise directions, it carries the fluid from inlet to discharge port while generating pressure at the discharge port.
Feature and Specification
Stainless Steel Self-Priming Pump Specification Chart
Max. flow rate | 50m3/h |
Max viscosity | 100000Cps |
Power supply | 0.75kw to 22kw |
Max. temperature | 120 °C |
Material | SS304/SS316L |
| Mechanical seal | single mechanical seal/double mechanical seal |
| Inlet/outlet connection | Thread, Clamp, Flange,Weld |
| Internal Surface treatment | ≤ Ra0.8μm as default |
| Motor brand | ABB or local motor |
| Motor type | variable frequency motor, fixed speed motor |
Max. flow rate | 50m3/h |
Frequency | 50HZ/60HZ |
Max. pressure | 8 bar |
Max. temperature | 110°C |
Material | SS304/SS316L |
| Inlet/outlet connection | Clamp, Weld, Flange |
| Inlet/outlet size | 1”-3” |
| Diaphragm | PTFE, PTFE with white back, EPDM, white EPDM, white NBR |
| Driving way | Air or Motor |
Features
● Heat jacket as an optional choice for the media that is easy to solidification and freezing, such as chocolate
● Super clean and compact design in mechanical seal to keep hygiene
● There is no friction between rotors and pump body which ensures a long using life
● It is time-saving in fast assemble and disassemble.
● It has a characteristics of low speed with high output
● The conveying process is smooth and continuous
● Built-in safety valve can be require if any need.
● It can be equipped with trolley and control panel
Application
The rotary lobe pump is sanitary design which has wide use in application. It is not only used in high viscosity fluids, such as tomato paste, honey, chocolate, yogurt, but also can be used for the CIP&SIP system. It is widely applied in food, beverage, dairy, cosmetics,pharmaceuticals,chemical industry and others.
