English
简体中文
Español
Русский
Français
العربية
Blogs
How this equipment behaves, and why
Seat materials, surface finishes, cleaning regimes and the failures that follow from getting them wrong — written by the people who answer the phone when one of them fails.
-
- Fittings and clamps
Por que válvulas e conexões de aço inoxidável ainda enferrujam? O aço inoxidável não deveria ser "à prova de ferrugem"?
A resposta curta: O aço inoxidável depende de uma "película de óxido de cromo" (camada de passivação) extremamente fina em sua superfície para evitar a ferrugem.
-
- Fittings and clamps
- 3 min de leitura
Key Differences Between NPT and BSP Pipe Fitting Dimensions
In brief: Both NPT and BSP are pipe-thread standards, but they use different thread angles. NPT is a U.S. 60° tapered pipe thread, while BSP is a British 55° pipe thread. BSP is further divided into tapered threads (BSPT) and parallel/straight threads (BSPP).
-
- Fittings and clamps
- 4 min de leitura
Steam Traps: Key Components for High-Purity Steam Piping Systems
In steam piping systems subject to stringent cleanliness standards, steam undergoes a phase change to form condensate after heat exchange. Air and non-condensable gases are also introduced during system startup, shutdown, and continuous operation.
-
- Fittings and clamps
- 4 min de leitura
What is a stainless steel elbow?
A stainless steel elbow is a crucial pipe fitting used to alter the flow direction of fluids within a pipeline, typically installed at points where the pipeline turns.
-
- Fittings and clamps
- 4 min de leitura
Tri clamp sanitary elbow standard
A Tri-Clamp stainless steel elbow is a pipe fitting that utilizes a clamp connection method, primarily used to change the flow direction of media within a pipeline.
-
- Fittings and clamps
- 4 min de leitura
What surface finish is required for stainless steel elbows?
Although stainless steel elbows possess inherent corrosion resistance, manufacturing processes can result in the formation of oxide layers, oil residues, impurities, and surface defects; therefore, appropriate surface treatment is usually necessary.
-
- Fittings and clamps
- 3 min de leitura
What is the best stainless steel grade for clamps in corrosive environments?
The core principle for selecting stainless steel grades for pipe clamps in corrosive environments is to choose a material with a corrosion rating higher than the environmental corrosion level, based on factors such as the specific corrosive medium, concentration, temperature, and whether welding is
-
- Fittings and clamps
- 2 min de leitura
What are the different connection methods for sanitary stainless steel sight glasses?
There are three main connection methods for sanitary stainless steel sight glasses: quick-release clamp connection, welding connection, and flange connection.
-
- Fittings and clamps
- 3 min de leitura
How to Select the Appropriate Pressure Rating for Flanged Sight Glasses
When selecting the appropriate pressure rating for a sight glass, the core principle is that the sight glass's design pressure must exceed the system's maximum operating pressure, while allowing for an adequate safety margin.