Stainless Steel High Pressure Three Way Flow Control Ball Valve
The stainless steel sanitary three-way ball valve is designed to achieve precise distribution, switching and confluence of fluids in pipeline systems, especially for environments requiring high hygiene standards. It can effectively control the flow direction of fluids between different pipelines, avoid cross contamination, and ensure the aseptic transmission of fluids. Through the rotation of the ball, it can seamlessly switch between different pipeline paths to ensure the efficient operation of the system. It is widely used in fluid control and regulation in food, pharmaceuticals, cosmetics and other industries.
Working Principles
The working principle of the stainless steel sanitary three-way ball valve is to control the flow direction of the fluid by rotating the ball with three channels. The through holes on the ball are connected to the pipeline. By adjusting the rotation angle of the ball, the fluid can be diverted, merged or switched between different pipelines to ensure that the fluid flows along the predetermined path and adjust the flow rate and flow direction as needed. It is commonly used in applications where fluid distribution and control is required.
The use of stainless steel sanitary three-way ball valves can reduce the resistance in fluid flow, optimize the flow rate and flow of the pipeline system, and improve the overall operating efficiency.
The options of stainless steel sanitary three-way ball valves include:
Material: 304, 316L stainless steel
Seal material: EPDM, PTFE, Viton
Interface type: welding, quick release, threaded
Drive mode: manual, pneumatic, electric
Structural type: L-type, T-type
Surface treatment: mirror polishing, electrolytic polishing
Specification Chart
Max. working pressure | 150 PSI |
Temperature range | -20° ~ +150°C or higher upon request |
Sizes available | 1/2" to 4" |
| End connection | Tri-Clamp, Butt-Weld, Flange, Threaded |
Body material | Stainless Steel 316L |
Ball material | Stainless Steel 316L |
Seal material | FDA Approved EPDM, Silicone, Viton |
Actuator Options | Manual, Pneumatic |
Surface Finish | Ra ≤ 0.8μm (Standard), Ra |
Flow Control | Linear |
Features
● The stainless steel sanitary three-way ball valve adopts L-type or T-type three-way ball design, which can accurately control the distribution, confluence and switching of fluids.
● There is no dead angle inside the stainless steel sanitary three-way ball valve, ensuring that the fluid will not be retained and reducing the risk of contamination.
● The stainless steel sanitary three-way ball valve adopts high-quality sealing materials (such as PTFE, EPDM) to ensure excellent sealing performance.
● The ball design and drive mode of the stainless steel sanitary three-way ball valve enable the valve to respond quickly to the needs of fluid control.
● The internal ball channel design of the stainless steel sanitary three-way ball valve ensures smooth fluid flow and provides a higher flow capacity.
● The stainless steel sanitary three-way ball valve controls the opening and closing pressure of the valve by adjusting the drive mechanism to adapt to different working conditions.
Application
Stainless steel sanitary three-way ball valves are widely used in the following industries: Food industry: control fluid distribution to ensure aseptic production. Pharmaceutical industry: meet hygiene standards and prevent cross contamination. Beverage industry: accurately adjust fluid flow direction to ensure production safety. Chemical industry: adapt to high temperature and high pressure environment, accurate diversion. Bioengineering: ensure fluid direction control to prevent pollution. Electronics industry: control the flow of clean gas to ensure environmental purity. Water treatment industry: adjust water flow direction to optimize treatment effect.
Working Principles
The working principle of the stainless steel sanitary three-way ball valve is to control the flow direction of the fluid by rotating the ball with three channels. The through holes on the ball are connected to the pipeline. By adjusting the rotation angle of the ball, the fluid can be diverted, merged or switched between different pipelines to ensure that the fluid flows along the predetermined path and adjust the flow rate and flow direction as needed. It is commonly used in applications where fluid distribution and control is required.
The use of stainless steel sanitary three-way ball valves can reduce the resistance in fluid flow, optimize the flow rate and flow of the pipeline system, and improve the overall operating efficiency.
The options of stainless steel sanitary three-way ball valves include:
Material: 304, 316L stainless steel
Seal material: EPDM, PTFE, Viton
Interface type: welding, quick release, threaded
Drive mode: manual, pneumatic, electric
Structural type: L-type, T-type
Surface treatment: mirror polishing, electrolytic polishing
Specification Chart
Max. working pressure | 150 PSI |
Temperature range | -20° ~ +150°C or higher upon request |
Sizes available | 1/2" to 4" |
End connection | Tri-Clamp, Butt-Weld, Flange, Threaded |
Body material | Stainless Steel 316L |
Ball material | Stainless Steel 316L |
Seal material | FDA Approved EPDM, Silicone, Viton |
Actuator Options | Manual, Pneumatic |
Surface Finish | Ra ≤ 0.8μm (Standard), Ra |
Flow Control | Linear |
Features
● The stainless steel sanitary three-way ball valve adopts L-type or T-type three-way ball design, which can accurately control the distribution, confluence and switching of fluids.
● There is no dead angle inside the stainless steel sanitary three-way ball valve, ensuring that the fluid will not be retained and reducing the risk of contamination.
● The stainless steel sanitary three-way ball valve adopts high-quality sealing materials (such as PTFE, EPDM) to ensure excellent sealing performance.
● The ball design and drive mode of the stainless steel sanitary three-way ball valve enable the valve to respond quickly to the needs of fluid control.
● The internal ball channel design of the stainless steel sanitary three-way ball valve ensures smooth fluid flow and provides a higher flow capacity.
● The stainless steel sanitary three-way ball valve controls the opening and closing pressure of the valve by adjusting the drive mechanism to adapt to different working conditions.
Application
Stainless steel sanitary three-way ball valves are widely used in the following industries: Food industry: control fluid distribution to ensure aseptic production. Pharmaceutical industry: meet hygiene standards and prevent cross contamination. Beverage industry: accurately adjust fluid flow direction to ensure production safety. Chemical industry: adapt to high temperature and high pressure environment, accurate diversion. Bioengineering: ensure fluid direction control to prevent pollution. Electronics industry: control the flow of clean gas to ensure environmental purity. Water treatment industry: adjust water flow direction to optimize treatment effect.
Home About JONENG Products Quality Guarantee Our Project Download Contact Us