离心泵

Stainless Steel Thread Horizontal End Suction Industrial Centrifugal Pump

品牌: JONENG
物料号: LD-743411978

A stainless steel centrifugal pump is a mechanical device that moves liquids by converting rotational energy into kinetic energy. Made from stainless steel, it has excellent resistance to corrosion, rust and chemical damage, making it suitable for a wide range of applications in harsh environments. The pump uses a rotating impeller to create centrifugal force, which pushes the liquid outward into the discharge pipe as liquid enters through the pump's inlet. This type of pump is widely used due to its durability, efficiency and ability to handle high temperatures and pressures.

The stainless steel centrifugal pump uses a rotating impeller to generate centrifugal force to transport liquid from the inlet to the discharge pipe. It is made of corrosion-resistant stainless steel and has an impeller that generates centrifugal force to push the fluid through the system. It is currently the most widely used type of pump in industry.

The working principle of a stainless steel centrifugal pump is to convert mechanical energy into fluid energy. The pump consists of an impeller mounted in a casing. As the impeller rotates, the stainless steel centrifugal pump transfers kinetic energy to the liquid, which creates a centrifugal force. This force pushes the fluid outward, increasing the fluid's velocity. As the fluid leaves the impeller, its pressure increases and is directed to the pump's discharge pipe. The pump's inlet draws in more fluid to replace the discharged fluid, maintaining a continuous flow rate.

Stainless Steel Lobe Pump Specification Chart

Max. flow rate	130m3/h
Max viscosity	100000Cps
Max pressur	7bar
Power supply	0.75kw to 30kw
Max. temperature	120 °C
Material	SS304/SS316L
Mechanical seal	single mechanical seal/double mechanical seal
Inlet/outlet connection	Thread, Clamp, Flange,Weld,Union
Internal Surface treatment	≤ Ra0.8μm as default
Motor brand	ABB or local motor
Frequency	50HZ/60HZ

Max. flow rate	130m3/h
Max viscosity	100000Cps
Power supply	0.75kw to 30kw
Max. temperature	120 °C
Material	SS304/SS316L
Mechanical seal	single mechanical seal/double mechanical seal
Inlet/outlet connection	Thread, Clamp, Flange,Weld,Union
Internal Surface treatment	≤ Ra0.8μm as default
Motor brand	ABB or local motor
Motor type	variable frequency motor, fixed speed motor
Frequency	50HZ/60HZ
Max. pressure	7 bar
Max. temperature	120°C
Material	SS304/SS316L
Inlet/outlet connection	Clamp, Weld, Flange
Inlet/outlet size	1”-3”
Diaphragm	PTFE, PTFE with white back, EPDM, white EPDM, white NBR
Driving way	Air or Motor