You are here: Home / Products / Strainer / Magnetic Filter / Stainless Steel Customised 90 Degree Single Bag Pipe Filter Strainer


Share to:

Stainless Steel Customised 90 Degree Single Bag Pipe Filter Strainer

The viewing mirror is also called the observer. Installation can be horizontal or vertical or any installation.
Uses: The sight glass can be used in chemical towers with high temperature, strong corrosiveness, easy poisoning, high danger, and easy crystallization to ensure its safe production.
Structure: The sight glass is mainly composed of the bottom plate of the sight glass, glass of the sight glass, valve components and so on.
  • JN ST 1003


  • 8421219990


When liquid or gas through filter, and them have some impurities, the in the filter’s metal mesh can remove the small particulate matter or impurities, any particulate matter that is bigger than the size of the perforations in the screen mesh does not pass through in the certain spec filter core, thus, is forced to stay behind, the liquid or gas finally released by the sanitary filter without any contaminants. Which is very convenient for use and maintenance, if need cleaning, just pull out the ink cartridge and put it back to the filter.


Sanitary Side-Entry Filters is used to eliminate the small particulates from compressors, pumps, meters and some other equipment. Main used in Beverage, Cosmetic, Dairy, Food, Meat or Poultry and Pharmaceutical Industries.

Working Principle

The sight glass is convenient for observing the fluid process in the pipeline. In the middle and low pressure towers with sight glass, due to the high working temperature and strong corrosive liquid, it is easy to cause damage to the glass of the sight glass of the liquid level gauge. , it is easy to cause the glass of the sight glass to break. If it is not discovered in time, oil leakage will inevitably occur after driving. At this point the entire system must be stopped for hot washing and replacement. This not only brings difficulties to the long-term safe operation of the system, but also seriously affects production efficiency.


●Back flush available when cleaning.

● High rejection rate, high flow rate.

● Without any small particulates or impurities

● Strong filter power, small damage

● Made by CNC machine

Technical design SPEC.

● Size: 1”-4”

● Material: AISI 316, AISI 304

● Connection: Clamped, Welded, Threaded

● Single or Multiple Cartridges Sanitary Filter Housings.

● Gasket:  Silicone, EPDM, Viton, PTFE

● Standard : 3A, DIN, SMS, ISO

● Mesh size : from 0.5mm to 2.0mm

● Screen:  from 30 mesh to 300 mesh

● Internal Finish:   Ra 16 ~ 32µin (0.4 ~ 0.8µm)

● External Finish:   Ra 16 ~ 32µin (0.4 ~ 0.8µm)

焊接 直通快装 直通

JoNeng valves company was started in 2007. Located in the stainless steel industry zone, Wenzhou, China. Totally 130nos of workers and the factory Covers 5000m2.



Leave a Message
Contact Us


 +86-158-69600665 / +86-577-85319280
    +86-577-86658703 / +86-577-85319281
Copyrights © 2016 Joneng Valves Co.,Ltd. All Rights Reserved. Sitemap | Support By Leadong